What is the difference between a hummer and a ringer type PEMF system?

This is the fundamental distinction between PEMF Devices, and I’ve been asked to explain it many times. Here is an explanation of the distinctions, in my perspective.

The majority of people who begin their investigation become perplexed for three reasons:

The conventional scientific community has harbored a long-standing prejudice against energy therapy; proponents are biased and frequently exaggerate performance; the topic is complex – and different technologies are described in similar ways, causing confusion.

Despite these difficulties, there is a big and rising number of people who have had a favorable experience to the point where they realize that energy devices have had a positive impact on their health and are willing to purchase one.

It’s critical to understand that there are two types of Electromagnetic Therapy Devices:

Electromagnetic Devices with Pulses
Devices with Resonant Electromagnetic Resonance

So, first and foremost, we’ll assist you in determining the type of equipment you’re researching. It’s the distinction between hummers and ringers…

Regarding Hummers

Resonant devices are most easily explained with a picture.  These are waveforms like those produced by different resonant devices. The amount of time it takes for one complete waveform is called the period, and the number of cycles per second is called the frequency.

The shapes of the waves reflect the waveform.

Sometimes these devices will “sweep” which is to go from one frequency to another – but they always output a repeating signal.

A picture is the best way to explain resonant devices.

These are waveforms similar to those generated by various resonant devices. The period is the amount of time it takes for one whole waveform to complete, and the frequency is the number of cycles per second.

The waveform is reflected in the waveform forms.

These devices will occasionally “sweep” from one frequency to the next, but they will always emit a repeating signal.

The properties that distinguish resonant devices operating at a specific frequency.

Because a “Pulse” is a significantly different waveform than any of these regular recurring waveforms, resonant device manufacturers claim that using the word “pulse,” as in pulsed electromagnetic device, misleads their readers.

Pulsed devices use the concept of frequency because they tune to a specific frequency to “sing” a frequency to activate one or more energy structures.

This has the potential to be quite valuable. Royal Rife made considerable use of frequency to target minuscule dimensions of creatures in order to blow them up.

Now we’ll talk about genuine pulses, sometimes known as Ringers.

RINGERS

A pulse is a discrete event generated by a quick release of energy, similar to a blast.

The following is an example of a pulsed waveform.

It’s important to note that this is a single event.

The ups and downs are echoes caused by energy bouncing around the antenna before leaving.

Items that are subjected to pulse events tend to resonate at their own frequency.

Consider ringing a bell: you strike it, and it rings.

The hit is the pulse, and the ringing that occurs is at the bell’s set frequency.

So, if you graph a ring, the hit comes first, followed by the ring. The ring’s frequency is determined by the entity that absorbed the energy.

Pulsed Magnetic Devices – these devices cause cells to ring at their own frequency.

Cells are similar to bells.

The effects of hummers and ringers are distinct. Now that we’ve cleared things out, let’s talk about electrical…

Electromagnetic Devices (EMDs) are a type of electromagnetic device that

Hummers and ringers are two types of magnetic devices.

Here are some hints to help you sort them into the appropriate categories.

We’ll build some filter questions for Pulsed Devices to aid in this sorting:

Is it powered by a spark or by a high-voltage generator?
Does it have a strong pulse, with a Guass rating of 1000+?
When it triggers, does it make a sound?
Do you have a sense of it?
All of these questions are usually answered affirmatively by a real Pulsed Electromagnetic Device.

However, we are concerned about the other devices because we believe it is critical for our audience to understand why the differences may be significant.

To see if it’s a Resonant Device, do the following:

Is it necessary to specify a square or sawtooth wave?
Is the device designed to deliver a specific “frequency”?
Is Gauss 300 used to describe the power?
Do you have a sense of it?
If you responded yes to these questions, your device is most likely a Resonant Device, which generates a waveform rather than a pulse.

Okay, so the actual question is: what do they do?

There are two types of gadgets, and while they are as different as cats and dogs, they are both animals because they both use an electro-magnetic field to induce physiological reactions.

The field’s characteristic, like that of animals, determines the effect.

The character of resonant and plasma discharge fields, as well as their effects, are vastly different.

Cats aren’t as good at keeping foxes out of the chicken coop as dogs are at hunting mice.

Each device’s performance and cost are tailored to specific requirements.

In terms of technical terms:

Hummers vs Ringers

Issue	Comment	Pulsed Device	Resonant Device
Signal Source	Natural versus computer. Plasma effects are significant at an nuclear level (Pappas)	High Voltage Spark	Computer Generated repeating Pattern
Frequency	Similar but pulses versus repeating waveform.	1-100 pulse per second	Set by control
Waveform	TSSD is much shorter and creates much stronger magnetic effects. Induces electroporation.	1-100 nanosecond burst pulse (see vector plot)	Resonant waveform
Peak Field Intensity	TSSDs create much stronger fields which the user feels – often strongly.	20,000+ Gauss	Around 1-500 Gauss depending on the device
Harmonic Spectrum	TSSDs have a much stronger and higher harmonic frequencies. See Eigen Modulation.	Strong High Frequency	Much lower high frequency intensity from switched low power controls instead of “plasma”.
Eigen Modulation – See US 5,556,418 Pappas	Pappas patents indicate that plasma to gas transition encodes Pulse waveform with nuclear information that activates atoms.	Nuclear activation of Oxygen, Carbon, Nitrogen by eigen modulated waveform.	No
Induces electroporation	TSSDs are powerful enough to cause Electroporation which elevates cellular exchange to a very high level.	Yes. See Detox & Pharmacokinetic effects.	No
Enhances Pharmacokinetics	TSSDs increase cellular delivery of nutrients and pharmaceuticals.	Yes. Increases uptake of therapeutic agents, Vitamin C, anti-pathogenic agent, to localized areas during electroporation.	No Known effect.
Detox Management	TSSDs are much more potent. Elevated respiration shifts cell toxins more and is more likely to cause detox challenge.	Yes. Prolonged exposure causes very elevated cellular exchange which can flood exit paths resulting in Herxheimers reaction	Uncommon. Excess exposure does not tend to cause detox challenge.
Cost	TSSDs cost more. They usually cost between 3-5x of harmonic devices.	High voltage components are expensive.	Microprocessors and low power amplifiers are inexpensive.
Typical Response Characteristics	There is some overlap, but the severity of the condition should guide usage.	Repair – provides stronger and more immediate health effect. Exhibits direct anti-pathogen effect for some bacterial strains	Maintenance – Tunes and stimulates cellular performance by frequency.
Anti Parasitic	Pulses tend to disrupt pathogens.	Very common to see tapeworm/etc exit after treatment of abdominal region.	No Comparable Effect
Anti Pathogenic – pharmacokinetic	Pulses improve antibiotic efficacy for antibiotic resistant organisms.Image of VRE infection after treatment TSSD, and antibiotics reported ineffective by CDC investigators onsite. 37% Morbidity Study	Typical to observe exit port and pus drainage after treatment of MRSA affected areas. & resolution with confirmed MRSA infection – especially when used to improve antibiotic uptake.Identical response to VRE using Penicillin every 4 hours Gentamicin 8 hours ancef 8 hour for 11 days. CDC investigators said those antibiotics are not effective on VRE. Amputation with VRE is typical and the doctors at the hospital told the patient that over 50% of those with VRE infected wounds die.	No Comparable Effect
Suggested Application		Severe Issues – Acute and chronic issues	At home maintenance.

As a result, both are valuable in our opinion.

Resonant devices are better suited to health-maintenance needs, whereas Plasma Discharge Devices are better suited to health-repair needs.

This discussion is dedicated to pulse discharge devices, also known as plasma discharge devices, which are distinct from resonance devices that use a variety of waveforms.

“Which is better?” is the fundamental question. That’s an unreasonable question because it all depends on the problem the device is supposed to solve. Here are some pointers: